Infiniti QX: Inside mirror
Adjust the height and the angle of the inside mirror to the desired position.
Automatic anti-glare type
The inside mirror is designed so that it automatically changes reflection according to the intensity of the headlights of the following vehicle. The anti-glare system will be automatically turned on when the ignition switch is pushed to the ON position. When the anti-glare system is turned on, the indicator light A will illuminate and excessive glare from the headlights of the vehicle behind you will be reduced. Push the “” switch B to make the inside rearview mirror operate normally. The indicator light will turn off. Push the “I” switch C to turn the system on. Do not allow any object to cover the sensors D or apply glass cleaner on them. Doing so will reduce the sensitivity of the sensor, resulting in improper operation. For the HomeLink® Universal Transceiver operation, see “HomeLink® Universal Transceiver” in the “2. Instruments and controls” section.
Mirrors
...
Outside mirrors
WARNING
► Objects viewed in the outside mirror on
the passenger side are closer than they
appear. Be careful when moving to the
right. Using only this mirror could cause
an accident. ...
See also:
Vehicle Dynamic Control (VDC) system
The Vehicle Dynamic Control (VDC) system
uses various sensors to monitor driver
inputs and vehicle motion. Under certain
driving conditions, the VDC system helps
to perform the following funct ...
Air bags
1. Passenger front air bag.
2. Main curtain air bag.
3. Side air bags.
4. Driver’s front air bag.
Note: The general location of air bags fitted to the vehicle are marked by the
word AIR BAG. ...
Precautions on distance control assist system
The system is intended to assist the driver
to keep a following distance from the
vehicle ahead traveling in the same lane
and direction.
If the distance sensor A detects a slower
moving v ...