Buick Enclave: Ignition Positions - Starting and Operating - Driving and Operating - Buick Enclave Owner's ManualBuick Enclave: Ignition Positions

The ignition switch has four different positions.

The ignition switch has four different positions.

In order to shift out of P (Park), the ignition must be in ON/RUN or ACC/ACCESSORY and the brake pedal must be applied.

Notice: Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key. Use the correct key, make sure it is all the way in, and turn it only with your hand.

If the key cannot be turned by hand, see your dealer.

When the vehicle is stopped, turn the ignition switch to LOCK/OFF to turn the engine (STOPPING THE ENGINE/ LOCK/OFF): When the vehicle is stopped, turn the ignition switch to LOCK/OFF to turn the engine off.

Retained Accessory Power (RAP) will remain active. See Retained Accessory Power (RAP) .

This position locks the ignition and transmission. The key can be removed in LOCK/OFF.

Do not turn the engine off when the vehicle is moving. This will cause a loss of power assist in the brake and steering systems and disable the airbags.

If the vehicle must be shut off in an emergency:

1. Brake using a firm and steady pressure. Do not pump the brakes repeatedly. This may deplete power assist, requiring increased brake pedal force.
2. Shift the vehicle to N (Neutral).

This can be done while the vehicle is moving. After shifting to N (Neutral), firmly apply the brakes and steer the vehicle to a safe location.

3. Come to a complete stop, shift to P (Park), and turn the ignition to LOCK/OFF. On vehicles with an automatic transmission, the shift lever must be in P (Park) to turn the ignition switch to the LOCK/OFF position.
4. Set the parking brake.

See Parking Brake .

Turning off the vehicle while moving may cause loss of power assist in the brakeWARNING
Turning off the vehicle while moving may cause loss of power assist in the brake and steering systems and disable the airbags.

While driving, only shut the vehicle off in an emergency.

If the vehicle cannot be pulled over, and must be shut off while driving, turn the ignition to ACC/ACCESSORY.

The steering can bind with the wheels turned off center. If this happens, move the steering wheel from right to left while turning the key to ACC/ACCESSORY. If this does not work, then the vehicle needs service.

ACC (ACC/ACCESSORY): This is the position in which you can operate the electrical accessories or items plugged into the accessory power outlets. This position unlocks the ignition and steering wheel.

Use this position if the vehicle must be pushed or towed.

► (ON/RUN): This position can be used to operate the electrical accessories and to display some instrument panel warning and indicator lights. This position can also be used for service and diagnostics, and to verify the proper operation of the malfunction indicator lamp as may be required for emission inspection purposes.

The switch stays in this position when the engine is running.

The transmission is also unlocked in this position. If you leave the key in the ACC/ACCESSORY or ON/RUN position with the engine off, the battery could be drained. You may not be able to start the vehicle if the battery is allowed to drain for an extended period of time.

starts the engine. When the engine starts, release the key. (START): This is the position that starts the engine. When the engine starts, release the key.

The ignition switch will return to ON/RUN for driving.

    New Vehicle Break-In
    Notice: The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: ► If you have all-wheel drive, keep your speed at 88 km/h ( ...

    Starting the Engine
    Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. To restart the engine when the vehicle is already moving, use N (Neutral) only. Notice: Do not tr ...

    See also:

    Heated steering wheel
    The heated steering wheel system is designed to operate only when the surface temperature of the steering wheel is below 688F (208C). Push the heated steering wheel switch to warm the stee ...

    Attaching the cargo net
    Cargo net attached behind the C-pillar ► Insert guide rod 2 into retainer 1 in the direction of the arrow. ► Slide guide rod 2 forwards into retainer 1 in the direction of the arro ...

    Driver Information Center (DIC)
    Your vehicle has a Driver Information Center (DIC). The DIC displays information about your vehicle. It also displays warning messages if a system problem is detected. The DIC also allows some featu ...