Cadillac Escalade: Front Wiper Blade Replacement
1. Pull the windshield wiper arm connector away from the windshield.
2. Squeeze the grooved areas on each side of the blade, and turn the blade assembly away from the arm connector.
3. Install the new blade onto the arm connector and make sure the grooved areas are fully set in the locked position.
For the proper type and size, see Maintenance Replacement Parts .
Wiper Blade Replacement
Windshield wiper blades should be inspected for wear or cracking. See Maintenance
Schedule .
Replacement blades come in different types and are removed in different ways. ...
Rear Wiper Blade Replacement
1. Lift the wiper blade assembly up and out of the park rest position.
2. Pull the wiper blade assembly away from the backglass. The backglass wiper
blade will not lock in a vertical position, so ...
See also:
Monitoring range of the sensors
Blind Spot Assist monitors the area shown in
the figure up to 10 ft (3 m) behind and
immediately adjacent to your vehicle.
WARNING
Blind Spot Assist monitors certain areas in the
im ...
Maximum inflation pressure
The maximum pressure to which the tire should be inflated. This pressure is given
on the tire side wall in lbf/in2 (psi) and kPa.
Note: This pressure is the maximum allowed by the tire manufacturer ...
Emergency key
Note: There are two designs of Smart Key, refer to the information which is relevant
to the design of Smart Key supplied with the vehicle.
A. Press emergency key release button and pull out side ...
