Buick Enclave: Folding Mirrors - Exterior Mirrors - Keys, Doors, and Windows - Buick Enclave Owner's ManualBuick Enclave: Folding Mirrors

For vehicles with manual folding mirrors, push the mirror toward the vehicle. Pull the mirror out to return to its original position.

For vehicles with outside power foldaway mirrors:

1. Press (A) to fold the mirrors out to the driving position.

1. Press (A) to fold the mirrors out to the driving position.
2. Press (B) to fold the mirrors in to the folded position.

Resetting the Power Foldaway Mirrors

Reset the power foldaway mirrors if:

► The mirrors are accidentally obstructed while folding.

► They are accidentally manually folded/unfolded.

► The mirrors vibrate at normal driving speeds.

Fold and unfold the mirrors one time using the mirror controls to reset them to their normal position.

► popping noise may be heard during the resetting of the power foldaway mirrors. This sound is normal after a manual folding operation.

    Power Mirrors
    Controls for the outside power mirrors are located on the driver door. To adjust each mirror: 1. Press (A) or (B) to select the mirror. 2. Press on the control pad to adjust the mirror. 3. Press ...

    Heated Mirrors
    For vehicles with heated mirrors: (Rear Window Defogger): Press to heat the mirrors. See “Rear Window Defogger” under Dual Automatic Climate Control System  for more information. ...

    See also:

    Topping up the brake fluid
    NOTICE Brake fluid will damage painted surfaces. Soak up any spillage with an absorbent cloth immediately and wash the area with a mixture of car shampoo and water. Only use new fluid from an ...

    Draining of coolant water
    If the vehicle is to be left outside without antifreeze, drain the cooling system, including the engine block. Refill before operating the vehicle. For details, see “Engine cooling system” ...

    System maintenance
    ► The two radar sensor units 1 for the BSW and Blind Spot InterventionTM systems are located near the rear bumper. Always keep the area near the radar sensors clean. Do not attach st ...