Cadillac Escalade: Ending Cruise Control
There are three ways to end cruise control:
- To disengage cruise control, step lightly on the brake pedal.
- Press
on the steering wheel. - To turn off the cruise control, press
on the steering wheel.
Using Cruise Control on Hills
How well the cruise control works on hills depends on the vehicle speed, the
load, and the steepness of the hills. When going up steep hills, pressing the accelerator
pedal may be necessary to maint ...
Erasing Speed Memory
The cruise control set speed is erased from memory by pressing the
button or if the ignition is turned
off. ...
See also:
Setting the Clock
The navigation system time and the analog clock operate independently. Changing
the time through the navigation system does not change the time on the analog clock.
See Clock to change t ...
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The height ...
Towing the vehicle on four wheels
WARNING
If the engine cannot be used during towing, there will be no power assistance
to the braking or steering systems. This will result in much greater effort to steer
and stop the vehicl ...
