Mercedes-Benz GL-Class: Displaying a service message - Service interval display - Maintenance - Maintenance and care - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Displaying a service message

► Switch on the ignition.
► Press display menu on the steering wheel. to select the standard display menu on the steering wheel.
► Select interval display. to select the service interval display.

The service due date appears in the multifunction display.

    Hiding a service message
    ► Press the R reset button on the instrument cluster. ...

    Please bear the following in mind
    Resetting service interval display If the qualified specialist workshop, e.g. a Mercedes-Benz Center, carried out the maintenance work, the service interval display will be reset. Further infor ...

    See also:

    SBZA Detection Zones
    The SBZA sensor covers a zone of approximately one lane over from both sides of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back approximately 5.0m(16 ft). The height ...

    Hints on driving with ACC
    The system acts by regulating the speed of the vehicle, using engine control and the brakes. Gear changes may occur in response to deceleration or acceleration while in ACC. ACC is not a collisio ...

    Liftgate
    Manual Liftgate Operation WARNING Exhaust gases can enter the vehicle if it is driven with the liftgate or trunk/hatch open, or with any objects that pass through the seal between the body and the ...