Mercedes-Benz GL-Class: Defrosting the windshield - Operating the climate control system - Climate control - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Defrosting the windshield

You can use this function to defrost the windshield or to defrost the inside of the windshield and the side windows.

function until the windshield is clear again. You should only select the defrosting function until the windshield is clear again.

► Turn the SmartKey to position 2 in the ignition lock.
► To activate: press the button.

The indicator lamp in the lights button lights up.

The climate control system switches to the following functions:

• cooling with air dehumidification on
• high airflow
• high temperature
• air distribution to the windshield and front side windows
• air-recirculation mode off

► To switch off: press the button.

The indicator lamp in the goes button goes out. The previously selected settings come into effect again. The cooling with air dehumidification function remains on. Airrecirculation mode remains deactivated.
or
► Press the or button.
or
► Press the or button.
or
► Turn the temperature control clockwise or counter-clockwise.
or
► Press the Defrosting the windows button.

    Activating/deactivating the MONOfunction
    The MONO function is only available with automatic climate control.18 You can use the MONO function to adopt the settings configured for temperature, air distribution and airflow on the driver's s ...

    Defrosting the windows
    Windows fogged up on the inside ► Activate the cooling with air dehumidification function . ► Activate automatic mode . ► If the windows continue to fog up, activate the defr ...

    See also:

    Releasing seat belts
    ► Press release button 4 and guide belt tongue 2 back towards belt sash guide 1. Make sure that the seat belt is fully rolled up. Otherwise, the seat belt or belt tongue will be trapped i ...

    Power steering fluid
    Check the fluid level in the reservoir. The fluid level should be checked using the HOT range (1 : HOT MAX., 2 : HOT MIN.). at fluid temperatures of 122 to 1768F (50 to 808C) or using the CO ...

    Environmental factors influence the rate of corrosion
    Moisture Accumulation of sand, dirt and water on the vehicle body underside can accelerate corrosion. Wet floor coverings will not dry completely inside the vehicle, and should be removed for ...