Mercedes-Benz GL-Class: Cruise control lever

1 To store the current speed or a higher
speed
2 To store the current speed or a lower
speed
3 To deactivate DISTRONIC
4 To store the current speed or to call up
the last stored speed
Important safety notes
DISTRONIC regulates the speed and
automatically helps you maintain the
distance to the vehicle detected in front. It
brakes automatically in order to avoid
exceeding the set speed.
On long and ...
Switching on DISTRONIC, storing andmaintaining the current speed
WARNING
The vehicle can be braked when DISTRONIC
is activated. For this reason, deactivate
DISTRONIC if the vehicle is to be set in motion
by other means (e.g. in a car wash or by
tow ...
See also:
Steps for determining correct load limit
WARNING
Do not exceed the vehicle capacity weight (the total weight of driver, passengers
and cargo) given on the tire information label.
1. Locate the statement “The combined weight of occ ...
Precautions on vehicle-to-vehicle distance control mode
The system is intended to enhance the
operation of the vehicle when following a
vehicle traveling in the same lane and
direction.
If the distance sensor A detects a slower
moving vehicle a ...
California Proposition 65 Warning
Most motor vehicles, including this one, contain and/or emit chemicals known
to the State of California to cause cancer and birth defects or other reproductive
harm. Engine exhaust, many parts and s ...






