Infiniti QX: Checking engine oil level

1. Park the vehicle on a level surface and apply the parking brake. 2. Run the engine until it reaches operating temperature. 3. Turn off the engine. Wait more than 15 minutes for the oil to drain back into the oil pan. 4. Remove the dipstick and wipe it clean. Reinsert it all the way. 5. Remove the dipstick again and check the oil level. It should be within the range 1 . If the oil level is below 2 , remove the oil filler cap and pour recommended oil through the opening. Do not overfill 3 . 6. Recheck oil level with the dipstick. It is normal to add some oil between oil maintenance intervals or during the breakin period, depending on the severity of operating conditions.
CAUTION
Oil level should be checked regularly.
Operating the engine with an insufficient
amount of oil can damage the engine, and
such damage is not covered by warranty.
Engine oil
...
Changing engine oil and filter
Vehicle set-up
1. Park the vehicle on a level surface and
apply the parking brake.
2. Run the engine until it reaches operating
temperature.
3. Turn the engine off and wait more than
15 min ...
See also:
Steering Wheel Controls
Vehicles with audio steering wheel controls could differ depending on the vehicle's
options. Some audio controls can be adjusted at the steering wheel.
Press to select preset or favorite
r ...
After Off-Road Driving
Remove any brush or debris that has collected on the underbody or chassis, or
under the hood. These accumulations can be a fire hazard.
After operation in mud or sand, have the brake linings cleaned ...
License plate lamp bulb replacement
1. Using a small flat-bladed screwdriver, carefully prize the lamp from the tailgate.
2. Twist the bulb holder counter-clockwise to unlock then pull to remove. Pull
out the bulb to remove. ...






