Infiniti QX: CD/DVD/USB memory care and cleaning - Audio system - Monitor, climate, audio, phone and voice recognition systems - Infiniti QX Owner's ManualInfiniti QX: CD/DVD/USB memory care and cleaning

CD/DVD

CD/DVD

► Handle a CD/DVD by its edges. Never touch the surface of the disc. Do not bend the disc.
► Always place the discs in the storage case when they are not being used.
► To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion. Do not use a conventional record cleaner or alcohol intended for industrial use.
► A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated.

USB memory

►Never touch the terminal portion of the USB memory.
► Do not place heavy objects on the USB memory.
► Do not store the USB memory in highly humid locations.
► Do not expose the USB memory to direct sunlight.
► Do not spill any liquids on the USB memory. Refer to the USB memory Owner’s Manual for the details.

1. Audio source switch

1. Audio source switch
2. Menu control switch
3. Back switch
4. Volume control switch

    Front auxiliary input jacks
    The front auxiliary input jacks are located in the console box. NTSC compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary jacks. Co ...

    Steering-wheel-mounted controls for audio
    Menu control switch While the display is showing a MAP, STATUS or Audio screen, tilt the switch upward or downward to select a station, track, CD or folder. For most audio sources, tilting th ...

    See also:

    Trailer electrical connection
    NOTICE Only connect approved electrical circuits, which are in good condition, to the trailer socket. When a trailer electrical connection is made, and the vehicle’s direction indicators ...

    To erase all programing
    For first time programing, ensure that the engine is switched off: 1. Ensure that the ignition is on (but with the engine switched off). 2. Press and hold the two outer buttons on the transceiver in ...

    Electric Brake Control Wiring Provisions
    These wiring provisions are included with the vehicle as part of the trailer wiring package. These provisions are for an electric brake controller. The instrument panel contains blunt cut wires near ...