Cadillac Escalade: Automatic Transmission Shift Lock Control Function Check - Vehicle Checks - Vehicle Care - Cadillac Escalade Owner's ManualCadillac Escalade: Automatic Transmission Shift Lock Control Function Check

Cadillac Escalade / Cadillac Escalade Owner's Manual / Vehicle Care / Vehicle Checks / Automatic Transmission Shift Lock Control Function Check

WARNING WARNING

When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured.

1. Before starting this check, be sure there is enough room around the vehicle. It should be parked on a level surface.

2. Firmly apply the parking brake. See Parking Brake  .

Be ready to apply the regular brake immediately if the vehicle begins to move.

3. With the engine off, turn the ignition on, but do not start the engine. Without applying the regular brake, try to move the shift lever out of P (Park) with normal effort. If the shift lever moves out of P (Park), contact your dealer for service.

    Starter Switch Check
    WARNING When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before starting this check, be sure there is enough room ar ...

    Ignition Transmission Lock Check
    While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF in each shift lever position. The ignition should turn to LOCK/OFF only when the shift lever is in P (Park). ...

    See also:

    Special winter equipment
    It is recommended that the following items be carried in the vehicle during winter: ► A scraper and stiff-bristled brush to remove ice and snow from the windows and wiper blades. υ ...

    XM NavTraffic (USA and Canada)
    Vehicles with the navigation system have an XM NavTraffic receiver. XM NavTraffic is a subscription service provided via XM Satellite Radio. XM NavTraffic provides real-time traffic information full ...

    Changing from low to high range
    With the vehicle traveling no faster than 38 mph (60 km/h), select N. Press the front of the transfer gearbox switch to select Hi. Indication of the range change status is the same as for the stati ...