Cadillac Escalade: Universal Remote System Programming - Universal Remote System - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: Universal Remote System Programming

Vehicles with the Universal Remote System will have these buttons located in

Vehicles with the Universal Remote System will have these buttons located in the headliner.

This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices.

Do not use this system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982.

Read the instructions completely before attempting to program the transmitter. Because of the steps involved, it may be helpful to have another person assist with programming the transmitter.

Be sure to keep the original remote control transmitter for use in other vehicles, as well as for future programming. Only the original remote control transmitter is needed for Fixed Code programming.

The programmed buttons should be erased when the vehicle is sold or the lease ends. See “Erasing Universal Home Remote Buttons” in this section.

Park the vehicle outside of the garage when programming a garage door. Be sure that people and objects are clear of the garage door or gate that is being programmed.

Universal Remote System
See Radio Frequency Statement   for information regarding Part 15 of the Federal Communications Commission (FCC) rules and Industry Canada Standards RSS-GEN/210/220/310. ...

Programming Universal Home Remote — Rolling Code
For questions or help programming the Universal Home Remote System, call 1-866-572-2728 or go to www.learcar2u.com. Most garage door openers sold after 1996 are Rolling Code units. Programming a ga ...

See also:

Roadside assistance program
In the event of a roadside emergency, Roadside Assistance Service is available to you. Please refer to your Warranty Information Booklet (U.S.) or Warranty & Roadside Assistance Informatio ...

Trailer direction indicators (green)
Illuminates as a bulb check when the ignition is switched on and extinguishes when the engine is started. If a trailer is attached, the warning lamp will flash in conjunction with the direction ...

Important safety notes
You will find an illustration of the instrument cluster in the "At a glance" section. WARNING   A driver's attention to the road and traffic conditions must always be his/her p ...