Cadillac Escalade: Traction Control System (TCS)/StabiliTrak® Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: Traction Control System (TCS)/StabiliTrak® Light

The TCS/StabiliTrak light comes on briefly when the engine is started.

The TCS/StabiliTrak light comes on briefly when the engine is started.

If the light does not come on or stays on, have the vehicle serviced by the dealer. If the system is working normally, the indicator light turns off.

If the light comes on and stays on while driving, and a message displays in the Driver Information Center (DIC), have the vehicle serviced by the dealer. See Ride Control System Messages   for more information.

If the light flashes while driving, this means that StabiliTrak or TCS is assisting in controlling the vehicle. See StabiliTrak® System   for more information.

    StabiliTrak® OFF Light
    This light comes on briefly while starting the engine. If it does not, have the vehicle serviced by your dealer. If the system is working normally, the indicator light then goes off. Press and re ...

    Tire Pressure Light
    For vehicles with the Tire Pressure Monitor System (TPMS), this light comes on briefly when the engine is started. It provides information about tire pressures and the TPMS. When the Light Is On ...

    See also:

    Retained Accessory Power (RAP)
    These vehicle accessories can be used for up to 10 minutes after the ignition key is turned off: ► Audio System . Power Windows . Sunroof (if equipped) Power to the windows and sunroof will ...

    Using seat belts and child safety locks
    1. SEAT BELT HEIGHT ADJUSTMENT: Press to release the catch. With the catch depressed move the mechanism slide up or down to the required height. Ensure that the locking mechanism has engaged. Wh ...

    Lift gate release lever
    If the lift gate cannot be opened with the door lock switch due to a discharged battery, follow these steps. 1. Remove the cover A inside of the lift gate using a suitable tool. 2. Move th ...