Infiniti QX: Setting memory function - Automatic drive positioner - Pre-driving checks and adjustments - Infiniti QX Owner's ManualInfiniti QX: Setting memory function

The status of the following settings can be linked to the Intelligent Key and the memorized settings can be available for each Intelligent Key.

► Air conditioner system
► Navigation system
► Audio system

To use the memory function, lock the doors with the Intelligent Key that is linked to the settings. To enable the memorized settings: 1. Carry the Intelligent Key that is linked to the settings, and unlock the doors by pushing the driver’s door handle request switch or “UNLOCK” button on the Intelligent Key. 2. Push the ignition switch to the “ON” position. “Connection with the key has been done” will be displayed on the screen and the memorized settings are available (only when a new Intelligent Key is used).

    Memory storage
    Two positions for the driver’s seat, steering column and outside mirrors can be stored in the automatic drive positioner memory. Follow these procedures to use the memory system. 1. Move t ...

    System operation
    The automatic drive positioner system will not work or will stop operating under the following conditions: ► When the vehicle speed is above 4 MPH (7 km/h). ► When the adjusting s ...

    See also:

    Reclining Seatbacks
    To adjust the seatback: Tilt the top of the control rearward to recline. Tilt the top of the control forward to raise. See Reclining Seatbacks  . ...

    Using Voice Commands During a Planned Route
    Cancel Route 1. Push . System responds: “OnStar ready,” then a tone. Say “Cancel route.” System responds: “Would you like to cancel route directions to your destination? ...

    Headlamp courtesy delay
    This feature operates whenever the lamps master switch is left in the Auto position (4), and the ignition is turned off. The headlamps will remain illuminated for up to 240 seconds. Note: The tim ...