Infiniti QX: Power steering - Starting and driving - Infiniti QX Owner's ManualInfiniti QX: Power steering

If the engine is not running or is turned off WARNING
If the engine is not running or is turned off while driving, the power assist for the steering will not work. Steering will be harder to operate. The power assisted steering uses a hydraulic pump, driven by the engine, to assist steering. If the engine stops or the drive belt breaks, you will still have control of the vehicle. However, much greater steering effort is needed, especially in sharp turns and at low speeds.

    SNOW mode
    For driving or starting the vehicle on snowy roads or slippery areas, turn the SNOW mode on. To turn the SNOW mode on, push the SNOW mode switch. The SNOW mode indicator light on the meter ...

    See also:

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. A. Fill Plug B. Drain Plug When the differential is cold, add enough lubricant to raise the level from 0mm (0 in) to 3.2 ...

    How to Check Power Steering Fluid
    Notice: Extremely small amounts of contamination can cause steering system damage and cause it to not work properly. Do not allow contaminants to contact the fluid side of the reservoir cap/ dipstic ...

    Replacing Safety Belt System Parts after a Crash
    WARNING A crash can damage the safety belt system in the vehicle. ► damaged safety belt system may not properly protect the person using it, resulting in serious injury or even death in a cr ...