Infiniti QX: Operating manual lift gate
To open the lift gate, unlock it and push the
lift gate opener switch A . Pull up the lift
gate to open.
The lift gate can be unlocked by:
► pushing the unlock button on the
Intelligent Key twice.
► pushing the lift gate request switch with
the Intelligent Key carried on you.
► pushing the door handle request switch
twice with the Intelligent Key carried on
you.
► pushing the power door lock switch to
the unlock position.
► inserting the mechanical key into the
driver’s door key cylinder and turning it
to the rear of the vehicle twice.
To close the lift gate, pull down until it
securely locks.
Lift gate
WARNING
► Always be sure the lift gate has been
closed securely to prevent it from opening
while driving.
► Do not drive with the lift gate open. This
could allow dangerous exha ...
Operating power lift gate
To operate the power lift gate, the selector
lever must be in the P (Park) position.
The power lift gate will not operate if the
battery voltage is low.
Power lift gate main switch
The power ...
See also:
Cargo tie-down rings
Observe the following notes on securing
loads:
• secure the load using the cargo tie down
rings.
• do not use elastic straps or nets to secure
a load, as these are only intended as an
anti ...
Floor Console Storage
For vehicles with a second row center console, open each area to access the storage
compartment inside.
To access the upper storage area, press the upper button (B) and lift up. To
access the ...
Safety Belt Extender
If the vehicle's safety belt will fasten around you, you should use it.
But if a safety belt is not long enough, your dealer will order you an extender.
When you go in to order it, take the heav ...
