Mercedes-Benz GL-Class: Multifunction display
Values and settings as well as display messages are shown in the multifunction display.
1 Trip odometer
2 Odometer
3 Transmission position
4 Status bar with outside temperature or
speed
For further information on displaying the transmission position, see.
Operating the on-board computer
The on-board computer is activated as soon
as you turn the SmartKey to position 1 in the
ignition lock.
You can control the multifunction display and
the settings in the on-board computer using
...
See also:
Push-button ignition switch
WARNING
Do not operate the push-button ignition
switch while driving the vehicle except in an
emergency. (The engine will stop when the
ignition switch is pushed 3 consecutive
times or the ...
Adding Washer Fluid
The vehicle has a low washer fluid message on the DIC that comes on when the
washer fluid is low. The message is displayed for 15 seconds at the start of each
ignition cycle. When the WASHER FLUID L ...
How to Reset the Engine Oil Life System
Reset the system whenever the engine oil is changed so that the system can calculate
the next engine oil change. Always reset the engine oil life to 100% after every
oil change. It will not reset it ...
