Setting a speed

WARNING   Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing ro ...

Making adjustments in 5 mph (Canada:10 km/h) increments

► Briefly press the cruise control lever beyond the pressure point, up 1 for a higher speed or down 2 for a lower speed. The last speed stored is increased or reduced. ...

See also:

Detection beam issues
Detection issues can occur: 1. When driving on a different line to the vehicle in front. 2. When a vehicle edges into your lane. The vehicle will only be detected once it has moved fully into yo ...

Ignition Positions
The ignition switch has four different positions. To shift out of P (Park), the ignition must be in ON/RUN or ACC/ ACCESSORY and the regular brake pedal must be applied. A (STOPPING THE ENGINE/ L ...

Uniform Tire Quality Grading
Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information ...