Cadillac Escalade: Leaving After Parking on a Hill - Driving Characteristics and Towing Tips - Towing - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Leaving After Parking on a Hill

1. Apply and hold the brake pedal.
2. Start the engine.
3. Shift into a gear.
4. Release the parking brake.
5. Let up on the brake pedal.
6. Drive slowly until the trailer is clear of the chocks.
7. Stop and have someone pick up and store the chocks.

    Parking on Hills
    WARNING Parking the vehicle on a hill with the trailer attached can be dangerous. If something goes wrong, the rig could start to move. People can be injured, and both the vehicle and the trail ...

    Maintenance When Trailer Towing
    The vehicle needs service more often when pulling a trailer. See the Maintenance Schedule for more information. Things that are especially important in trailer operation are automatic transmission f ...

    See also:

    Distracted Driving
    Distraction comes in many forms and can take your focus from the task of driving. Exercise good judgment and do not let other activities divert your attention away from the road. Many local govern ...

    Ignition Positions
    The ignition switch has four different positions. In order to shift out of P (Park), the ignition must be in ON/RUN or ACC/ACCESSORY and the brake pedal must be applied. Notice: Using a tool to ...

    Window reset
    The windows will need to be reset if the battery is disconnected, becomes discharged or power supply is interrupted. Reset as follows: 1. Close the window fully. 2. Release the switch, then lift ...