Mercedes-Benz GL-Class: Introduction
The Settings menu can be used for:
• restoring the factory settings
• changing the instrument cluster settings
• changing the time/date settings
• changing the light settings
• changing the vehicle settings
• changing the convenience settings
Settings menu
...
Resetting to factory settings
For safety reasons, the Daytime Running
Lamps function in the Lighting submenu is
only reset when the engine is switched off.
► Press
on the steering wheel
to select the Settings menu.
...
See also:
Speed-dependent mode
If vehicle speed drops below 5 mph (8 km/h) with the wipers operating, the wipers
will switch to the next lowest speed. When vehicle speed increases to over 5 mph
(8 km/h), the original wiper spee ...
Setting the specified minimum distance
You can set the specified minimum distance
for DISTRONIC by varying the time span
between one and two seconds. This time span
determines the distance that DISTRONIC
should maintain from the vehicl ...
Headlamp High/ Low-Beam Changer
Headlamp High/Low-Beam Changer:
Push the turn signal/lane change lever away from you to turn the high beams on.
Pull the lever toward you to return to low beams.
This indicator light turns on i ...
