Infiniti QX: How to adjust the screen view
To adjust the Display ON/OFF, Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor, push the SETTING button with the Around View Monitor on, select the item key and adjust the level using the INFINITI controller. Do not adjust the Brightness, Tint, Color, Contrast and Black Level of the Around View Monitor while the vehicle is moving. Make sure the parking brake is firmly applied.
Camera aiding corner sonar function
When the corner of the vehicle moves
closer to the object while the Around View
Monitor is displayed, an indicator is
displayed and a tone is sounded by the
corner sonar function to warn the d ...
Around ViewTM Monitor settings
To set up the Around View Monitor to your
preferred settings, push the SETTING button,
select the “Other” key and then select
the “Camera” key.
Predictive Course Lines:
When this ite ...
See also:
Danger, Warnings, and Cautions
Warning messages found on vehicle labels and in this manual describe hazards
and what to do to avoid or reduce them.
Danger indicates a hazard with a high level of risk which will result in serious ...
If your vehicle is stolen
If your vehicle is stolen, you should change
the codes of any non-rolling code device
that has been programmed into
HomeLink®. Consult the Owner’s Manual
of each device or call the manufact ...
Speed-dependent mode
If vehicle speed drops below 5 mph (8 km/h) with the wipers operating, the wipers
will switch to the next lowest speed. When vehicle speed increases to over 5 mph
(8 km/h), the original wiper spee ...
