Cadillac Escalade: High-Beam On Light - Warning Lights, Gauges, and Indicators - Instruments and Controls - Cadillac Escalade Owner's ManualCadillac Escalade: High-Beam On Light

This light comes on when the high-beam headlamps are in use.

This light comes on when the high-beam headlamps are in use.

See Headlamp High/Low-Beam Changer   for more information.

    Security Light
    The security light should come on briefly as the engine is started. If the system is working normally, the indicator light turns off. If it does not come on, have the vehicle serviced by your deal ...

    Front Fog Lamp Light
    The front fog lamp light comes on when the fog lamps are in use. The light goes out when the fog lamps are turned off. See Fog Lamps   for more information. ...

    See also:

    Break-in schedule
    CAUTION During the first 1,200 miles (2,000 km), follow these recommendations to obtain maximum engine performance and ensure the future reliability and economy of your new vehicle. Fail ...

    Cruise control lever
    1 To store the current speed or a higher speed 2 To store the current speed or a lower speed 3 To deactivate cruise control 4 To store the current speed or to call up the last stored speed Wh ...

    4WD shift indicator
    The 4WD shift indicator is displayed in the vehicle information display. The indicator should turn off within 1 second after placing the ignition switch in the ON position. While the engin ...