Mercedes-Benz GL-Class: General information - Display messages - On-board computer and displays - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: General information

WARNING All categories of messages contain important information which should be taken 
All categories of messages contain important information which should be taken note of and, where a malfunction is indicated, addressed as soon as possible at an authorized Mercedes-Benz Center.
Failure to repair the condition noted may cause damage not covered by the Mercedes-Benz Limited Warranty, or result in property damage or personal injury.

Display messages appear in the multifunction display.

Display messages with graphic displays may be shown in simplified form in the Operator's Manual and may differ from the messages shown in the multifunction display.

Please respond in accordance with the display messages and follow the additional notes in this Operator's Manual.

Certain display messages are accompanied by an audible warning tone or a continuous tone.

    Hiding display messages
    You can hide some display messages with a low priority. ► Press the , button on the steering wheel to select another display. or ► Press the R reset button on the instrument clus ...

    See also:

    Operating the on-board computer
    The on-board computer is activated as soon as you turn the SmartKey to position 1 in the ignition lock. You can control the multifunction display and the settings in the on-board computer using ...

    Rear Window Wiper/Washer
    The rear wiper control is located on the turn and lane-change lever. To turn the rear wiper on, slide the lever to a wiper position. (Off): Turns the wiper off. (Rear Wiper Delay): Turns on the ...

    Using the 3.5mm (1/8 in) Auxiliary Input Jack
    The auxiliary input jack is located on the lower right side of the faceplate. This is not an audio output; do not plug a headphone set into the front auxiliary input jack. Connect an auxiliary inpu ...