Cadillac Escalade: Erasing Speed Memory - Cruise Control - Cruise Control - Driving and Operating - Cadillac Escalade Owner's ManualCadillac Escalade: Erasing Speed Memory

The cruise control set speed is erased from memory by pressing the off. button or if the ignition is turned off.

    Ending Cruise Control
    There are three ways to end cruise control: To disengage cruise control, step lightly on the brake pedal. Press on the steering wheel. To turn off the cruise control, press on the steering ...

    See also:

    To erase all programing
    For first time programing, ensure that the engine is switched off: 1. Ensure that the ignition is on (but with the engine switched off). 2. Press and hold the two outer buttons on the transceiver in ...

    Weight-Distributing Hitch Adjustment
    A. Body to Ground Distance B. Front of Vehicle When using a weight-distributing hitch, the spring bars should be adjusted so the distance (A) is the same after coupling the trailer to the tow veh ...

    Xenon bulbs
    If your vehicle is equipped with Xenon bulbs, you can recognize this by the following: the cone of light from the Xenon bulbs moves from the top to the bottom and back again when you start the eng ...