Starting the engine

1. Apply the parking brake. 2. Move the selector lever to the P (Park) or N (Neutral) position. (P is recommended.). The starter is designed not to operate unless the selector lever is in eith ...

Engine protection mode

The engine has an engine protection mode to reduce the chance of damage if the coolant temperature becomes too high (for example, when climbing steep grades in high temperature with heavy load ...

See also:

HDC operation
With HDC engaged, the speed of descent can be altered using the cruise control steering wheel switches, as follows: • To increase speed press and hold the + switch (2) until the desired speed ...

Warning displays
The warning displays show the distance between the sensors and the obstacle. The warning display for the front area is located on the dashboard above the center air vents. The warning display fo ...

Correct use of the seat belts
WARNING   USE SEAT BELTS PROPERLY • Seat belts can only work when used properly. Never wear seat belts in any other way than as described in this section, as that could result in seri ...