Mercedes-Benz GL-Class: Cruise control lever

1 To store the current speed or a higher
speed
2 To store the current speed or a lower
speed
3 To deactivate cruise control
4 To store the current speed or to call up
the last stored speed
When you activate cruise control, the stored speed is shown in the status indicator of the multifunction display:
• USA only: e.g. Cruise 55 Miles
• Canada only: e.g.
90 Km/h
Cruise control
Important safety notes
Cruise control maintains a constant road
speed for you. It brakes automatically in order
to avoid exceeding the set speed. On long and
steep downhill gradients, especially i ...
Storing and maintaining the currentspeed
You can store the current speed if you are
driving faster than 20 mph (30 km/h).
► Accelerate the vehicle to the desired
speed.
► Briefly press the cruise control lever
up 1 or down ...
See also:
Cleaning the wiper blades
WARNING
Before cleaning the windshield or wiper
blades, switch off the windshield wipers and
remove the SmartKey from the ignition lock.
On vehicles with KEYLESS-GO, press the
Start/S ...
Tire pressure label
The recommended tire pressures are listed on a label located in the driver’s
door opening. These pressures provide optimum ride and handling characteristics
for all normal operating conditions ...
Engine
Display messages
(USA only)
(Canada only)
The yellow Check
Engine warning lamp
lights up while the
ignition is switched on
with the engine
running.
Possible causes/consequences and ► ...






