Infiniti QX: Child restraints

- Precautions on child restraints
- Lower Anchors and Tethers for CHildren System (LATCH)
- LATCH lower anchor
- Installing child restraint LATCH lower anchor attachments
- Top tether strap child restraint
- Rear-facing child restraint installation using LATCH
- Rear-facing child restraint installation using the seat belts
- Forward-facing child restraint installation using LATCH
- Forward-facing child restraint installation using the seat belts
- Installing top tether strap (2nd row captain’s seats or 2nd row bench seat)
- Installing top tether strap (3rd row bench seat)
- Booster seats
Larger children
Children who are too large for child
restraints should be seated and restrained
by the seat belts which are provided. The
seat belt may not fit properly if the child is
less than 4 ft 9 in (14 ...
Precautions on child restraints
WARNING
► Failure to follow the warnings and
instructions for proper use and installation
of child restraints could result in
serious injury or death of a child or other
passengers in ...
See also:
Monitoring range of the sensors
Blind Spot Assist monitors the area shown in
the figure up to 10 ft (3 m) behind and
immediately adjacent to your vehicle.
WARNING
Blind Spot Assist monitors certain areas in the
im ...
Locking the vehicle
If the vehicle can no longer be locked with the
SmartKey, you can lock it by taking the
following steps.
► Close the front-passenger door, the
rear
door on the front-passenger side and the ...
SBZA Detection Zones
The SBZA sensor covers a zone of approximately one lane over from both sides
of the vehicle, 3.5m (11 ft). This zone starts at each side mirror and goes back
approximately 5.0m(16 ft). The height ...






