Mercedes-Benz GL-Class: Calling up a stored setting
► Press and hold the relevant storage position button 1, 2 or 3 until the seat, steering wheel and exterior mirrors are in the stored position.
The setting procedure is interrupted as
soon as you release the storage position
button.
Storing settings
With the memory function, you can store up
to three different settings, e.g. for three
different people.
The following settings are stored as a single
memory preset:
• position of the seat, ...
See also:
Operating the jack
1. Locate the jack under the recommended jacking point.
2. Attach the cranking lever to the jack using the adaptor. Fit the wheel nut
brace to the end of the cranking lever and rotate clockwise t ...
Sunroof
A. Open or Close
B. Vent
On vehicles with a sunroof, the sunroof only operates when the ignition is in
the ACC/ACCESSORY or ON/RUN, or when Retained Accessory Power (RAP) is active. See
Retained ...
Intelligent Brake Assist (IBA) OFF switch (if so equipped)
The vehicle should be driven with the
Intelligent Brake Assist (IBA) system on
for most driving conditions.
The Intelligent Brake Assist (IBA) system
will sound a warning chime to alert the ...
