Mercedes-Benz GL-Class: Brake fluid level - Checking and adding other serviceproducts - Engine compartment - Maintenance and care - Mercedes-Benz GL-Class Owner's ManualMercedes-Benz GL-Class: Brake fluid level

the brake fluid reservoir has fallen to the If you notice that the brake fluid level in the brake fluid reservoir has fallen to the MIN mark or less, check the brake system immediately for leaks. Also check the thickness of the brake linings. Contact a qualified specialist workshop, e.g. an authorized Mercedes-Benz Center immediately.

Do not add brake fluid. This does not correct the error.

Only check the brake fluid level when the vehicle is stationary and on a level surface.

The brake fluid level is correct if it is between

The brake fluid level is correct if it is between MIN marking 2 and MAX marking 1 on the brake fluid reservoi

    Windshield washer system andheadlamp cleaning system
    The washer fluid reservoir is used for both the windshield washer system and the headlamp cleaning system. Vehicle components and their service products must match. You should, therefore, only ...

    See also:

    When the System Does Not Seem To Work Properly
    Missed alerts can occur under normal circumstances and will increase in wet conditions. The system does not need to be serviced. SBZA is designed to ignore stationary objects; however, the system ma ...

    SmartKey
    0 To remove the SmartKey 1 Power supply for some consumers, such as the windshield wipers 2 Ignition (power supply for all consumers) and drive position 3 To start the engine The SmartKey can ...

    Important safety notes
    The EASY-ENTRY/EXIT feature makes getting in and out of your vehicle easier. You can activate and deactivate the EASYENTRY/ EXIT feature in the on-board computer. WARNING   You must ...