Infiniti QX: Before starting the engine - Starting and driving - Infiniti QX Owner's ManualInfiniti QX: Before starting the engine

► Make sure the area around the vehicle is clear.
► Check fluid levels such as engine oil, coolant, brake fluid and window washer fluid as frequently as possible, or at least whenever you refuel.
► Check that all windows and lights are clean.
► Visually inspect tires for their appearance and condition. Also check tires for proper inflation.
► Lock all doors.
► Position seat and adjust head restraints/ headrests.
► Adjust inside and outside mirrors.
► Fasten seat belts and ask all passengers to do likewise.
► Check the operation of warning lights when the ignition switch is pushed to the ON position. (See “Warning/indicator lights and audible reminders” in the “2. Instruments and controls” section.)

    Intelligent Key battery discharge
    If the battery of the Intelligent Key is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure: 1. Mov ...

    Starting the engine
    1. Apply the parking brake. 2. Move the selector lever to the P (Park) or N (Neutral) position. (P is recommended.). The starter is designed not to operate unless the selector lever is in eith ...

    See also:

    Universal Remote System Programming
    This system provides a way to replace up to three remote control transmitters used to activate devices such as garage door openers, security systems, and home automation devices. Do not use the ...

    How to Check Lubricant
    To get an accurate reading, the vehicle should be on a level surface. A. Fill Plug B. Drain Plug When the differential is cold, add enough lubricant to raise the level from 0mm (0 in) to 3.2 ...

    Ride Control System Messages
    SERVICE STABILITRAK If your vehicle has StabiliTrak and this message displays, it means there may be a problem with the StabiliTrak system. If you see this message, try to reset the system. Stop; t ...