Mercedes-Benz GL-Class: Before changing a fuse
► Park the vehicle and apply the parking
brake.
► Switch off all electrical consumers.
► Remove the SmartKey from the ignition
lock.
The fuses are located in various fuse boxes:
• fuse box on the front-passenger side of the
dashboard
• fuse box in the engine compartment on the
right-hand side of the vehicle, when viewed
in the direction of travel
• fuse box in the cargo compartment on the
right-hand side of the vehicle, when viewed
in the direction of travel
The fuse allocation chart is located in the vehicle tool kit in the stowage compartment under the trunk floor.
Important safety notes
The fuses in your vehicle serve to close down
faulty circuits. If a fuse blows, all the
components on the circuit and their functions
stop operating.
WARNING
Only use fuses approved b ...
Dashboard fuse box
Do not use a pointed object such as a
screwdriver to open the cover in the
dashboard. You could damage the
dashboard or the cover.
► To open: pull cover 1 outwards in
the
direction ...
See also:
Dynamic stability control (DSC) (Amber)
Illuminates briefly as a bulb check when the ignition is switched on.
If the lamp flashes while driving, the DSC system is active. If the lamp illuminates
continuously while driving, there is a f ...
Ignition Transmission Lock Check
While parked, and with the parking brake set, try to turn the ignition to LOCK/OFF
in each shift lever position.
The ignition should turn to LOCK/OFF only when the shift lever is in P
(Park).
...
Safety Belt Extender
If the vehicle's safety belt will fasten around you, you should use it.
But if a safety belt is not long enough, your dealer will order you an extender.
When you go in to order it, take the hea ...
