Cadillac Escalade: Audio Output - Rear Seat Entertainment (RSE) System (Overhead) - Rear Seat Infotainment - Infotainment System - Cadillac Escalade Owner's ManualCadillac Escalade: Audio Output

Audio from the DVD player or auxiliary inputs can be heard through the following possible sources:

  • Wireless headphones
  • Vehicle speakers
  • Vehicle-wired headphone jacks on the RSA system, if the vehicle has this feature.

The RSE system always transmits the audio signal to the wireless headphones, if there is audio available. See “Headphones” earlier in this section for more information.

The DVD player is capable of outputting audio to the wired headphone jacks on the RSA system, if the vehicle has this feature. The DVD player can be selected as an audio source on the RSA system. See Rear Seat Audio (RSA) System   for more information.

When a device is connected to the A/V jacks, or the radio's auxiliary input jack if the vehicle has this feature, the rear seat passengers are able to hear audio from the auxiliary device through the wireless or wired headphones. The front seat passengers are able to listen to playback from this device through the vehicle speakers by selecting AUX as the source on the radio.

    Audio/Video (A/V) Jacks
    Yellow: Video Input White: Left Audio Input Red: Right Audio Input The A/V jacks, located on the rear of the floor console, allow audio or video signals to be connected from an auxiliary device ...

    Video Screen(s)
    The video screen(s) are located in the overhead console. To use the video screen(s): 1. Push the release button located on the overhead console. 2. Move the screen to the desired position. When th ...

    See also:

    Full size spare and tire change
    The system will automatically recognize any changes in wheel positions. The vehicle must be stationary for 15 minutes during the wheel and tire change (see 212, WHEEL CHANGING), to ensure that the ...

    Changing a flat tire
    If you have a flat tire, follow the instructions below. Stopping the vehicle 1. Safely move the vehicle off the road and away from traffic. 2. Turn on the hazard warning flashers. 3. Park on ...

    SNOW mode
    For driving or starting the vehicle on snowy roads or slippery areas, turn the SNOW mode on. To turn the SNOW mode on, push the SNOW mode switch. The SNOW mode indicator light on the meter ...