Infiniti QX: Air conditioning system refrigerant and lubricant recommendations - Capacities and recommended fuel/lubricants - Technical and consumer information - Infiniti QX Owner's ManualInfiniti QX: Air conditioning system refrigerant and lubricant recommendations

The air conditioning system in your INFINITI vehicle must be charged with the refrigerant HFC-134a (R-134a) and the lubricant, NISSAN A/C system oil Type S or the exact equivalents.

CAUTION
The use of any other refrigerant or lubricant will cause severe damage to the air conditioning system and will require the replacement of all air conditioner system components.

The refrigerant HFC-134a (R-134a) in your INFINITI vehicle will not harm the earth’s ozone layer. Although this refrigerant does not affect the earth’s atmosphere, certain governmental regulations require the recovery and recycling of any refrigerant during automotive air conditioning system service. Your INFINITI retailer has the trained technicians and equipment needed to recover and recycle your air conditioning system refrigerant. Contact an INFINITI retailer when servicing your air conditioning system.

    Engine oil and oil filter recommendation
    Selecting the correct oil It is essential to choose the correct grade, quality, and viscosity engine oil to ensure satisfactory engine life and performance, see “Capacities and recommended fu ...

    Specifications
    Engine This spark ignition system complies with the Canadian standard ICES-002. Wheels and tires Road wheel ...

    See also:

    Battery Replacement
    To change the batteries on the headphones: 1. Turn the screw to loosen the battery door located on the left side of the headphones. Slide the battery door open. 2. Replace the two batteries in th ...

    Where to go for service
    If maintenance service is required or your vehicle appears to malfunction, have the systems checked and serviced by an INFINITI retailer. INFINITI technicians are well-trained specialists an ...

    Power steering fluid
    Check the fluid level in the reservoir. The fluid level should be checked using the HOT range (1 : HOT MAX., 2 : HOT MIN.). at fluid temperatures of 122 to 1768F (50 to 808C) or using the CO ...