Infiniti QX: 4WD shift switch - INFINITI all-mode 4WD® (if so equipped) - Starting and driving - Infiniti QX Owner's ManualInfiniti QX: 4WD shift switch

► Shift the 4WD shift switch to either the AUTO, 4H or 4L position, depending on driving conditions.
► With the switch set to the AUTO position, distribution of torque to the front and rear wheels changes automatically, depending on road conditions encountered [ratio; 0 : 100 (2WD) ? 50 : 50 (4WD)]. This results in improved driving stability.
► If the 4WD shift switch is operated while making a turn, accelerating or decelerating or if the ignition switch is placed in the OFF position while in the AUTO, 4H or 4L, you may feel a jolt. This is not abnormal.
► When the vehicle is stopped after making a turn, you may feel a slight jolt after the selector lever is shifted to N (Neutral) or P (Park) position. This occurs because the transfer clutch is released and not because of a malfunction.

CAUTION
► When driving straight, shift the 4WD shift switch to the AUTO or 4H position. Do not move the 4WD shift switch when making a turn or reversing.
► Do not shift the 4WD shift switch while driving on steep downhill grades. Use the engine brake and low automatic transmission gears for engine braking.
► Do not operate the 4WD shift switch with the rear wheels spinning.
► Before placing the 4WD shift switch in the 4H position from AUTO, ensure the vehicle speed is less than 62 MPH (100 km/h). Failure to do so can damage the 4WD system.
► Never shift the 4WD shift switch between 4L and 4H while driving.
► Engine idling speed is high while warming up the engine. Be especially careful when starting or driving on slippery surfaces with the 4WD shift switch in AUTO.

    INFINITI all-mode 4WD® system
    The all mode 4WD system provides 3 positions (AUTO, 4HI and 4LO), so you can select the desired drive mode according to the driving conditions. 4WD shift procedure: 1: The 4LO and 4HI indic ...

    4WD shift indicator
    The 4WD shift indicator is displayed in the vehicle information display. The indicator should turn off within 1 second after placing the ignition switch in the ON position. While the engin ...

    See also:

    Instrument Cluster
    English Shown, Metric Similar ...

    Storing the current speed or calling upthe last stored speed
    WARNING   The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising ...

    Canceling Guidance
    Guidance is canceled once the final destination is reached. To cancel guidance prior to arrival at the final destination: 1. Press DEST. 2. Press Cancel Guidance. 3. Press OK to confirm. Guidance ...